The shower is one of the more challenging areas of the home to maintain. Because of the soaps, shampoos, and hard water minerals, residues build up and cling to surfaces. Plus, the dark, humid environment is the perfect breeding ground for harmful mold and bacteria. There are several approaches on how to clean a tile shower, and we're going to go through five of them here.
You could use a professional maid service. For those who would rather not go that route, these steps will help you clean your shower on your own. If you prefer not to use chemical cleaners, an alternate to step two is provided. There are five steps to this method:
Tile showers will retain their just-cleaned finish if they are dried after each use. This will slow the buildup of soap scum and mold.
Professional cleaning coaches recommend daily shower maintenance and a thorough cleaning once every week. For this cleaning technique, the prevention of build-up is as important as the cleaning method.
For daily maintenance, squeegee the water off the walls, doors, and bottom of the shower after every use. Run the vent fan or open a window for 20-30 minutes to disburse the humidity. Several other tips keep the tile shower easier to maintain.
How to clean a tile shower actually starts with keeping up on your weekly cleaning. Setting a good routine in place to keep you shower clean will make the deep cleaning process signifigantly easier.
First wipe the shower door, floor, and wall tiles with an eraser sponge. Mix a solution of two parts water and one part vinegar. Use this solution to clean the grout with a brush. Do not use bleach on the grout. Bleach will damage the surface, making it susceptible to stains and mold.
To clean the tile, make a paste of vinegar and baking soda, let the mixture sit for 20 minutes and scrub with a microfiber cloth. If the tile is difficult to clean, add a few drops of hydrogen peroxide to the paste.
It is advised not to use abrasive cleansers on porcelain or ceramic tiles because they can damage the grout and scratch the surface of the tile. It is also recommended not to use vinegar, because vinegar is highly acidic and may also damage the tile. The following products are recommended.
Use a soft sponge and a pH neutral ceramic and porcelain cleaner, following the directions of the product manufacturer. Use a grout brush to work the ceramic cleaner between the tiles. Rinse and dry the surfaces.
Related: The Best Hardwood Floor Vacuum
When cleaning hard water stains, soap scum, or mold, use an alkaline cleanser and a soft brush to scrub until the stains are gone. Use grout cleaner and scrub with a grout brush. After scrubbing mold, discard the brush to prevent recontamination. When using a product other than what is recommended by the manufacturer, test a small area before cleaning the entire shower.
It is recommended to treat ceramic or porcelain shower tiles with a stain-resistant penetrating sealer when the shower is installed, and every year after that. It is important to check product directions, as some products will require a more frequent application.
Hard water stains, soap deposits, and mold can make a tile shower challenging to clean. Once the shower is clean, it is advised to dry the tiles after every use. Taking the time to wipe the shower will make cleaning the tiles easier. When shower tiles are dry, there is less opportunity for mold and bacteria to grow in the dark, humid conditions.